Antwort:
Short answer: CO₂ laser cutting machines can cut most non-metallic materials, including wood, acrylic, fabric, leather, paper, cardboard, rubber, plastics, and more. They cannot cut metals or PVC (polyvinyl chloride) materials.
CO₂ lasers operate at a wavelength of 10.6μm, which is easily absorbed by non-metallic materials. This makes them ideal for processing organic materials like wood, textiles, and plastics. Metals reflect the laser beam and cannot be cut with standard CO₂ laser cutting machines.
Materials Suitable for CO₂ Laser Cutting
Wood and Wood Products
CO₂ lasers cut and engrave wood with excellent results. Compatible wood materials include:
-
Plywood – clean cuts with minimal charring
-
Medium Density Fiberboard (MDF) – smooth edges, ideal for signage
-
Solid wood – basswood, balsa, pine, spruce
-
Cardboard and paper – crisp, clean cuts with high precision
⚠️ Note: Avoid cutting oily woods such as purpleheart and mahogany, as they can produce excessive smoke and residue.
Acrylic (PMMA)
Acrylic is one of the most popular materials for CO₂ laser cutting. It produces:
-
Flame-polished edges on cast acrylic
-
Frosted engraving on extruded acrylic
-
Clean, transparent cut edges with no post-processing required
Fabrics and Textiles
CO₂ lasers are widely used in the textile industry for cutting and engraving:
-
Natural fabrics – cotton, silk, linen, hemp
-
Synthetic fabrics – polyester, nylon, non-woven materials
-
Felt – clean edges without fraying
-
Denim – precise cutting with sealed edges
This is the core application of CO₂ fabric laser cutting machines.
Leather
Both natural and synthetic leather can be cut and engraved with CO₂ lasers:
-
Genuine leather – clean cuts, no burning when properly set
-
Synthetic leather (PU) – sealed edges prevent delamination
Paper and Cardboard
Paper products cut exceptionally well with CO₂ lasers:
-
Cardstock and construction paper
-
Cardboard and corrugated board
-
Matboard and chipboard
Rubber
Chlorine-free rubber can be cut with CO₂ lasers:
-
Nitrile rubber (NBR)
-
Silicone rubber
-
Natural rubber (chlorine-free)
⚠️ Important: Rubber must not contain chlorine. PVC-based rubber materials are strictly prohibited. A proper fume extraction system is required when cutting rubber to prevent smoke buildup.
Plastics
Many engineering plastics are compatible with CO₂ laser cutting:
| Plastic Type | Compatibility |
|---|---|
| Acrylic (PMMA) | ✅ Excellent |
| Polyamide (PA / Nylon) | ✅ Good |
| Polyethylene (PE) | ✅ Good |
| Polypropylene (PP) | ✅ Good |
| Polycarbonate (PC) | ✅ Yes |
| PETG | ✅ Good |
| Polyimide (PI / Kapton) | ✅ Good |
Materials NOT Suitable for CO₂ Laser Cutting
Metals
Standard CO₂ lasers cannot cut metals such as steel, aluminum, copper, or brass. The laser beam reflects off metal surfaces rather than being absorbed. High-power CO₂ lasers (kW range) can cut thin metals, but this requires specialized industrial equipment.
PVC (Polyvinyl Chloride) and Vinyl
Strictly prohibited for CO₂ laser cutting. PVC releases toxic chlorine gas and corrosive hydrochloric acid when laser-cut, which seriously endangers operator health and damages the machine. Most manufacturers explicitly void warranties if PVC is processed in their equipment.
Material Compatibility Summary Table
| Material Category | Suitable for CO₂ Laser? | Notes |
|---|---|---|
| Wood and Plywood | ✅ Yes | Avoid oily woods |
| Acrylic (PMMA) | ✅ Yes | Excellent results, polished edges |
| Fabrics and Textiles | ✅ Yes | Cotton, silk, polyester, felt, denim |
| Leather | ✅ Yes | Natural and synthetic |
| Paper and Cardboard | ✅ Yes | Clean cuts |
| Rubber (chlorine-free) | ✅ Yes | Requires fume extraction |
| Plastics (PE, PP, PA, PC, PETG) | ✅ Yes | Most engineering plastics |
| Metals | ❌ No | Reflects laser beam |
| PVC / Vinyl | ❌ No | Releases toxic chlorine gas |
Unser Unternehmen stellt in erster Linie CO₂-GewebeLaserschneidemaschine | CO2-Laserschneidernclass="ds-markdown-paragraph">Unser Unternehmen stellt in erster Linie CO₂-Laserschneidemaschinen für Stoffe (80 W–300 W) her, die speziell für das Schneiden von Stoffen, Leder und Textilien entwickelt wurden. Wenn Sie andere Materialien wie Holz, Acryl oder Papier bearbeiten möchten, können wir Ihnen auf Grundlage Ihrer spezifischen Anforderungen geeignete Konfigurationen empfehlen.
Related products: Hochgeschwindigkeits-Laserschneidemaschine für Textilien mit · Panoramic CCD Laser Cutting Machine · Schneidemaschine mit oszillierendem Messer | CNC-Schneidemaschine mit Schwingmesser
Tell us what you cut and we will recommend the right machine —contact us here.
